China Testing Instruments Manufacturer,Whatsapp/Wechat:+8618620373879  Email: 464560351@qq.com

MEWOI-HDGC3985 Battery Discharge Charge Tester

MEWOI-HDGC3985 Battery Discharge Charge Tester

2023-07-13 11:53:45  

MEWOI-HDGC3985 Battery Discharge Charge Tester

  • Main Features :
  • Serial No. :
Contact US For Quotation  Email:mewoi009@mewoi.com  Whatsapp&Wechat:+8619925688679

MEWOI-HDGC3985 Battery Discharge Charge Tester

General information

Battery Discharge Charge Tester is mainly used for the charge test of the lead-acid battery of the backup power supply in the telecommunications, mobile, substation, railway transportation and pertrochemical industry power DC industries. It can proceed the discharge and charge for the batteries to extend the lift-time .
 

Features

● PTC ceramic resistor is adopted to avoid the red heat phenomenon for a safer discharge process .
● Cell monitoring module is performed the voltage commission by remote radio wireless communication mode, it can set up to four unique frequency brands.
● Wireless acquisition box can monitor each cell for monitoring the whole process of battery series .
● PC software can record and analyze total voltage, discharge current ,cell voltage and other data , generate the data report . it can virtually reflect battery serious performance curve, diagram and report for printing and searching .
● Connected with USB interface,the data of the discharge process can be record to U disk and transformed to PC by U disk .
● Intelligent SCM ARM control, 7inch 1024*600 LCD screen
● Automatic self-protection stop function, over-heat protection ,over voltage protection , over current protection and reverse connection protection ,alarm prompt is displayed on the screen .
● It can set charge/discharge termination condition including cell low voltage,whole group voltage low/high, charge current low, charge/discharge time , charge/discharge capacity .
● It can perform on-line compensated charge/discharge, and can also carry on discharge test for on-line working storage battery by connection external current clamp sensor.
● RS485 remote control charge , discharge and activation functions .
● It has the function of charge, discharge and activation with muti machine parallel mode by only operating in the display screen of the parallel instrument with parameters as the master.

 

Technical parameter

Suitable BatteryDC 48V
Model No.HDGC3985HDGC3985HDGC3985HDGC3985HDGC3985
Discharge Voltage RangeDC32-60VDC32-60VDC32-60VDC32-60VDC32-60V
Discharge Current Range0-150A0-150A0-150A0-200A0-300A
Charge Voltage RangeDC42V-60VDC42V-60VDC42V-60VDC42V-60VDC42V-60V
Charge Current Range0-50A0-100A0-150A0-200A0-300A
Working modeStandalone mode, parallel master mode, parallel slave mode, and remote controlled mode
Protection performanceOver-voltage protection, under-voltage stop, over-current protection, reverse wiring protection, 65℃ over-temperature protection,-LCD prompt and buzzer alarm
Cell voltage collection (optional)Multi-band RF wireless module for communication distance within 100m, compatible with 2V/4V/6V/12V cell voltage monitoring, 1-25 groups of RF wireless monitoring modules for monitoring up to 300 batteries, and single wireless monitoring module for monitoring 12 cells
Control precisionDischarge current≤±1%; group voltage≤±0.1%; cell voltage≤±0.1%
PC communicationRS485 interface, USB interface
Work Environment
Heat radiationForced air cooling
TemperatureWorking rage: -5-50℃  Storage temperature: -40-70℃
HumidityRelative humidity 0-90% (40±2℃)
ElevationRated elevation of 4,000m
Noise﹤75dB
Working Power Supply
VoltagePower supply: single-phase AC220V (-20%-+30%), frequency: 45-65Hz; charging power supply: refer to nameplate parameters or case label
Electric strength testInput-shell: 2200Vdc 1min
Input-output: 2200Vdc 1min
Output-shell: 700Vdc 1min
SafetyCompliance with EN610950
图片关键词


Telephone
Email
Map
QQ Chat