China Testing Instruments Manufacturer,Whatsapp/Wechat:+8618620373879  Email:

MEWOI1220B Wireless High voltage and low Voltage Clamp Leakage Current
MEWOI1220B Wireless High voltage and low Voltage Clamp Leakage Current
MEWOI1220B Wireless High voltage and low Voltage Clamp Leakage Current
MEWOI1220B Wireless High voltage and low Voltage Clamp Leakage Current

MEWOI1220B Wireless High voltage and low Voltage Clamp Leakage Current

2023-07-24 08:44:21  

MEWOI220B Wireless High voltage and low Voltage Clamp Leakage Current Meter

  • Main Features : 1. Measurement of H/L voltage AC leakage current (above 600V operate with insulation rod) 2. Range : AC 0.00mA~60.0A 3. Resolution : 0.01mA 4. Data Storage : 99 groups 5. Line Voltage : Test of the wire with insulation skin below 60kV, test of bare wire below 35kV (operate with insulation rod) 6. CT Size :φ68mm
  • Serial No. :
Contact Us For QuotationEmail:  464560351@qq.comWhatsapp&Wechat:+8618620373879


MEWOI1220B Wireless H/L Voltage Clamp Leakage Current Meter  adopts CT  technology and mask digital integration technology, the instrument composed of special clamp current meter and  high voltage insulation rod, wireless transmit test data,equiped with wireless receiver which can receive the tested data within straight line distance 30M. If not use  insulation rod, which can be used as high accuracy low voltage clamp current meter.

MEWOI1220B series H/L Voltage Clamp Leakage Current Meter connect with insulation rod, which can use for high voltage line current measurement of the wire with insulation skin below 60KV or bare wire below 35KV, online current measurements, also with peak hold, data hold and data storage and so on others functions, the special clamp current meter convenient to clamp or withdraw the tested wire operate by push or pull back the insulation rod, save time and convenient. It is widely used in substations, power plants, and industrial and mining enterprises, inspection stations, electrical maintenance departments for current detection and electrical field operations. It also can replace the H/L voltage transformation ratio tester, which can measure the H/L voltage current of the primary circuit and the secondary circuit respectively, and then calculate the H/L voltage transformation ratio. The insulation rod is light, has the characteristics of moisture-proof, high temperature resistance, impact resistance, bending resistance, high insulation, scalable and so on.


Function  Measurement of H/L voltage AC leakage current
Power Supply  DC 6V (LR03×4 alkaline dry batteries)
Test Mode  Clamp CT, integration method, the instrument can be hung on the line to test, more convenient to operation
Transmission Mode  433MH wireless transmission
Transmission Distance  30M
CT Size  φ68mm
Measurement Range  0.00mA~60.0A(50/60Hz automatic)
Resolution  0.01mA
Shift  0.00A~60.0A automatic shift


(23℃±5℃, below RH<80%)

Sampling Rate  2 time/second
Display Mode  4-digit LCD display
LCD Size  Detector: LCD 35mm×21.5mm
  Receiver: LCD 47mm×28.5mm
Meter Size  Detector 135mm×218mm×60mm
  Receiver 78mm×165mm×42mm
Data Storage 99 groups ,display the stored array number during storage of basic products; "MEM" symbol indicates during storage of wireless products,“FULL” symbol display indicate that storage full"
Line Voltage Below 60kV current test with insulated skin wire; below 35kV bare wire test (operate with insulation rods)
Data Hold In general test mode, press HOLD key to hold data, “DH” symbol display. press HOLD Key once again to cancel this function
Data Access  “MR” symbol indication, can access all storage data
Overflow Display  Exceed measure range overflow function: “OL A” symbol display
No Signal Indication When the receiver has not received transmit signal, dynamic display “no- -”symbol
Automatic Shut Down 15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption
Batter Voltage When battery voltage is lower than 4.8V, display low battery voltage symbol “ ”, and remind to replace the battery
Meter Weight 3930g( Including insulation rod and battery)
Working Environment -10℃~40℃; Below 80%rh
Store Environment -10℃~60℃; Below 70%rh
Interference avoid 315MHz, 433MHz same-frequency signal interference
Insulation Rod Dimension φ32mm,1m×5PCS
Insulation Strength Detcetor/Receiver: AC 2kV/rms ( between the out shell screws)
AC110kV/rms(all 5pcs insulation rod connect, between the two ends)
Structure Anti-Dripping Type II

Selection Guide

MEWOI1200H/L Voltage Clamp Current Meter0mA~1200A1mAΦ68mmBase type
MEWOI1200BWireless H/L Voltage Clamp Current MeterWireless type
MEWOI1220H/L Clamp Leakage Current Meter0.00mA~60.0A0.01mAΦ68mmBase type
MEWOI1220BWireless H/L Clamp Leakage Current MeterWireless type

Packing Details

Package Outer Package Carton
Inner Package Cloth bag
Accessory Detector 1 PCS
Antenna 1 PCS
Insulation Rod(1M) 5 PCS
Tool Bag 1 PCS
Manual 1 PCS
Certificate 1 PCS
Warranty Card 1 PCS

QQ Chat